Overview

Durcon epoxy resin and phenolic laboratory peg boards or drying racks are made in the same custom colors as our solid cast epoxy laboratory tops, sheet material and sinks, to meet the demands of architects, consultants and end-users.

Whether the requirement is for like or contrasting colors in the work or school environment, epoxy drying racks and phenolic drying racks meet those requirements. Pegboards / drying racks are made from 1" thick (25mm) sheet stock, with 3/8" (9.525mm) diameter holes and 2 prong removable polypropylene pegs and stainless-steel drip troughs with drain outlet and hose.

Pegboard Specification

Epoxy or phenolic pegboards are fabricated of 1" thick black material (typically) with black or white polypropylene pegs in 5", 6-1/2" and 8" lengths, with 2" to 4" deep full width stainless steel drip trough with outlet and hose. Base of pegs shall be two-prong style for mechanical attachment. Do not bond pegs to board. Pegs shall protrude at 45-degree angle. Pegboard to have finished face and exposed edges.

Available Colors

Black, Graphite Grey, Regular Grey, White or color as selected from supplier's full range of colored epoxy resin pegboards / drying racks.

Pegs

Polypropylene (PP) pegs are produced with 2 Prongs in either black or white color. Lengths are 5" (127 mm); 6.5" (165 mm) and 8" (200 mm). Prongs are 5/8" Length & 3/8" Diameter Round - Colors: Black or White.